3 Teaching3.9 Other Job-editing Functions3-62155223-1CDRE-CSO-A0363.9.2 Editing Interpolation TypeOperation Explanation1 Select {JOB} under the mainmenu.2 Select {JOB}. The JOB CONTENT window appears.3 Move the cursor to theinstruction area.4 Select the line to be modified. The instruction on the cursor is displayed in the input buffer line.5 Press [SHIFT] + the cursor keysimultaneously.The interpolation type in the input buffer line changes.The modification of the speed according to the modification of theinterpolation type is calculated by the ratio to maximum speed ateach speed.Joint Speed: MAX=100.0%Linear Speed: MAX=9000 cm/min(e.g.)Joint Speed: 50% = Linear Speed: 4500 cm/minLinear Speed: 10% = Linear Speed: 900 cm/min6 Press [ENTER]. The instruction on the cursor line is replaced with one on the inputbuffer line.Short CutMain JobJOB CONTENT0001000200030004000500060007NOP’CAR TYPE-A JOBJUMP JOB:JOB-01MOVJ VJ=50.00MOVJ VJ=50.00MOVJ VJ=50.00MOVJ VJ=50.000MOVJ VJ=50.00TOOL : 00JOB EDIT DISPLAY UTILITYShort CutMain Menu0007 MOVJ VJ=50.000MOVL V=4500Short CutMain MenuJOB CONTENT0001000200030004000500060007NOP’CAR TYPE-A JOBJUMP JOB:JOB-01MOVL V=4500MOVJ VJ=50.00MOVJ VJ=50.00MOVJ VJ=50.000MOVL V=4500TOOL : 00JOB EDIT DISPLAY UTILITY125 of 435
