4 Playback4.5 Playback with Reserved Start4-23155223-1CDRE-CSO-A036 Enabling Reserved StartThe start button on the station is operative when the reserved start function is enabled, and thefollowing start operations are disabled.• [START] on the programming pendant• Start operation from external input signal (system input)The OPERATING CONDITION window is shown only when the security mode ismanagement modeOperation Explanation1 Select {SETUP} under themain menu.2 Select {OPERATE COND}. The OPERATING CONDITION window appears. The screen isscrolled up/down by the cursor key when it locates at the top/bottom of the items.3 Select “RESERVED START.” Each time [SELECT] is pressed, “PERMIT” and “PROHIBIT”alternate. Select “PERMIT.”When reserved start is enabled, the external start and the programming pendant start areprohibited even if setting is “PERMIT.”Regardless of the operation cycle selected, it is automatically set to 1 CYCLE.NOTEShort CutMain MenuOPERATING CONDITIONEXTERNAL STARTEXTERNAL MODE SWITCHEXTERNAL CYCLE SWITCHPP CYCLE SWITCHEXTERNAL SERVO ONCHECK/MACHINE LOCKMASTER CALLING UPMASTER JOB CHANGERESERVED STARTRESERVED START JOB CHANGEPERMITPERMITPERMITPERMITPERMITPERMITPERMITPERMITPROHIBITPERMITDATA EDIT DISPLAY UTILITYShort CutMain MenuOPERATING CONDITIONEXTERNAL STARTEXTERNAL MODE SWITCHEXTERNAL CYCLE SWITCHPP CYCLE SWITCHEXTERNAL SERVO ONCHECK/MACHINE LOCKMASTER CALLING UPMASTER JOB CHANGERESERVED STARTRESERVED START JOB CHANGEPERMITPERMITPERMITPERMITPERMITPERMITPERMITPERMITPERMITPERMITDATA EDIT DISPLAY UTILITYNOTE174 of 435
