8 Parameter8.5 Parameters according to Status I/O8-38155223-1CDRE-CSO-A036 S4C024 to S4C031: DATA OF USER OUTPUT GROUPSThese parameters specify whether the output group instruction is executed with binary data or BCDdata.Differences Between Binary Data and BCD DataFor the input group and output group, the result will depend on whether the binary or BCDformula is used. When the input function is [10101010]However, in the case of BCD data, because the upper bound value is 99, it is not possibleto use any value which exceeds nine in the one or ten digit place.d15 d0OG#01OG#02OG#03OG#04OG#05OG#06OG#07OG#08OG#09OG#10OG#11OG#12OG#13OG#14OG#15OG#16S4C024d15 d0OG#17OG#18OG#19OG#20OG#21OG#22OG#23OG#24OG#25OG#26OG#27OG#28OG#29OG#30OG#31OG#32S4C025d15 d0OG#33OG#34OG#35OG#36OG#37OG#38OG#39OG#40OG#41OG#42OG#43OG#44OG#45OG#46OG#47OG#48S4C026BCD DATA SPECIFICATION AT BIT-ON (1)BCD DATA SPECIFICATION AT BIT-ON (1)BCD DATA SPECIFICATION AT BIT-ON (1)SUPPLE-MENTDATA EDIT DISPLAYUSER INPUTGROUP IG#01 0:10 00:16#10010#10011#10012#10013#10014#10015#10016#10017IN#0001IN#0002IN#0003IN#0004IN#0005IN#0006IN#0007IN#0008!BCDState Binary CaseTotalis inones.Totalis intens.101010102 0 = 121 = 222 = 423 = 824 = 1625 = 3226 = 6427 = 1281040160640852 0 = 121 = 222 = 423 = 820 = 121 = 222 = 423 = 8Case104010405555Binary data value BCD data value326 of 435
