6 Convenient Functions6.3 Parallel Shift Job Conversion Function6-33155223-1CDRE-CSO-A036 Operation ProcedureThe following is the operation procedure for parallel shift job conversion using position variables.Operation Explanation1 Set the parameter. Set the parameter S2C514 (SHIFT VALUE FOR PARALLELSHIFT JOB CONVERSION) to 1 (Position variable shift value.)2 Set the position variable. Specify a position variable in advance when setting a shift valueby position variables.For the setting of position variables, refer to section 3.9.4 "UserVariables".3 Select {JOB} under the mainmenu.4 Select {JOB}. The JOB CONTENT window appears.5 Select {UTILITY} under thepull-down menu.6 Select {PARALLEL SHIFTJOB}.The PARALLEL SHIFT JOB window appears.7 Specify the conversion items. Specify each item.8 Select “EXECUTE.” Select “EXECUTE” then the parallel shift job conversion isexecuted. The JOB CONTENT window appears when theconversion is completed.When “CANCEL” is selected, the display goes back to the JOBCONTENT window without executing conversion.Specify the position variable in advance when using the setting value as a shift value.FILE NO.SHIFT JOB NAMEMODECOORDINATESCONV. METHOD#P** #EX***TESTSINGLEROBOTCOMMONDATA EDIT DISPLAY UTILITYMain Menu ShortCutEXECUTE CANCELPARALLEL SHIFT JOBIf an alarm occurs during conversion, conversion issuspended.NOTENOTE229 of 435
