6 Convenient Functions6.5 Mirror Shift Function6-47155223-1CDRE-CSO-A036 Explanation of the Mirror Shift WindowSOURCE JOBSelects the conversion source job.To select another job to be converted, move the cursor to the name and press [SELECT] to callup the list of jobs. Select the desired job and press [SELECT].SOURCE CTRL GROUPDisplays the control group of the conversion source job.STEP SELECTIONSpecifies the steps to be converted. From the first step to the last step of the selected job arespecified as initial value.DESTINATION JOBSpecifies the converted job name. To enter the name, move the cursor to the name and press[SELECT]. The name of the conversion source job is displayed in the input line as initial value.When "***" is displayed, the name for the converted job is to be the same as that of theconversion source job.DEST CTRL GROUPSelects the control group for the converted job. When the destination job name is entered, thesame control group as the conversion source job is automatically set. To change it, move thecursor to the control group and press [SELECT] to call up the selection dialog box.COORDINATESSpecifies the coordinates used for conversion."PULSE": Executes the pulse mirror-shift conversion."ROBOT": Executes the mirror-shift conversion on the basis of the cartesian coordinates."USER": Executes the mirror-shift conversion on the basis of the specified user coordinates.USER COORD NO.Specifies the user coordinates number when "USER" is selected in .This item cannot be set when "PULSE" or "ROBOT" is selected in .TARGETSpecifies the coordinate where conversion is to be done when "ROBOT" or "USER" is selectedin . "XY," "XZ," or "YZ" can be selected. Always specify "XZ" for "ROBOT."EXECUTEMirror shift conversion is executed when pressing “EXECUTE” or [ENTER]. A job is createdwith the name of conversion source job when a job after conversion is not entered.DATA EDIT DISPLAY UTILITYMain Menu ShortCutMIRROR SHIFTSOURCE JOBSOURCE CTRL GROUPSTEP SECTIONDESTINATION JOBDEST CTRL GROUPCOORDINATESUSER COORD NO.TARGET: JOB1: R1: 001 → 010: ****: ****: PULSE::EXECUTE CANCEL243 of 435
