8 Parameter8.6 Parameters according to Coordinated or Synchronized Operation8-41155223-1CDRE-CSO-A036 S2C183: OPERATION METHOD AT FWD/BWD OPERATION ORTEST RUN BY INDEPENDENT CONTROLThis parameter specifies the operation method at FWD/BWD operation or test run by independentcontrol. S2C184: JOB AT CALLING MASTER OF SUBTASK 1, 2, 3, 4, 5, 6,7 BY INDEPENDENT CONTROLThis parameter specifies the job which is called up when the master of the subtask is called up byindependent control.Master Job: Job registered in the master control windowRoot Job: Job activated by PSTART instruction S2C194: STATION AXIS CURRENT VALUE DISPLAY FUNCTIONThis parameter specifies whether the function to display the current value of the station axis in thefollowing units is valid/invalid.• Rotary axis : Angle (deg)• Servo track : Distance (mm)0: The job of the task that is currently displayed operates.1: Jobs of all the tasks operate.0: Master job1: Root job0: Invalid1: Valid: Operating0: One of the task jobs that are currentlydisplayed operates.1: All task jobs operate.Sub task 1Mastertask Sub task 2MastertaskSub task 1Sub task 2: Not operating When master task is currently displayed: When sub task 2 is currently displayed: When sub task 1 is currently displayed:Sub task 1Sub task 1Sub task 2Sub task 2Sub task 1MastertaskMastertask329 of 435
