354 CHAPTER 8: T HE E VENT LOGThis dialog box allows you to enable or disable the individual features ofSmart Event Analysis by toggling their respective check boxes.You may also disable Smart Event Analysis completely by clearing theEnable Smart Event Analysis check box.If you completely disable Smart Event Analysis, the per-event settings forSmart Event Analysis will be ignored.Controlling SNMP Trap FilteringThe Enable trap filtering option in the global Smart Event Analysis dialogbox allows you to enable or disable the entire SNMP trap filtering feature.More precise control over SNMP trap filtering can be obtained by clickingDetails to launch the Trap Filtering dialog box:Figure 168 Trap Filtering Dialog BoxBy default, 3Com Network Director discards all SNMP traps received fromdevices and ports that are not in the current map without generatingevents for them. The Trap Filtering dialog box allows you to enable ordisable the generating of events for SNMP traps that are received fromdevices or ports that are not in the current map by toggling theirrespective check boxes.3Com Network Director will not register itself as an SNMP trapdestination with devices that are not in the map.If you wish 3Com Network Director to receive SNMP traps from a devicethat is not in the map then you will need to manually add the IP address
