620 CHAPTER 14: B ULK CONFIGURATION1 The attributes in this feature that rely on RADIUS authentication are notsupported because the device does not support RADIUS authentication.2 The attributes in this feature that relate to Rapid Spanning Tree Protocolare not supported because the device does not support the RapidSpanning Tree Protocol.3 The link state trap attribute of the port administration feature is notsupported on the Switch 4300 device.4 A license key is required for the SuperStack 3 Switch 4400 device toallow the feature to be fully supported on this device.5 3Com Network Director is unable to configure the non-default useraccount on the Switch 4005 device. This account must be configuredmanually on the device, see the Switch 4005 User Guide for details ofhow to configure the non-default user account.Switch 4300 Switch features: System information, Trap destinations,Spanning tree 2, IGMP.Port features: Spanning tree2 , Administration 3 ,Autonegotiation.Switch 4400 Family Switch features: User accounts 4, Secure Shell (SSH)4 ,Access rights, Trusted IP 4 , RADIUS servers4 , Systeminformation, Trap destinations, Spanning tree, IGMP,Broadcast storm control.Port features: Security 4, Spanning tree, Administration,Autonegotiation, LACP.Switch 49xx FamilySwitch 40x0 FamilySwitch features: User accounts, Access rights, RADIUSservers, System information, Trap destinations, Spanningtree, IGMP, Broadcast storm control.Port features: Spanning tree, Administration,Autonegotiation, LACP.Switch 4005 Switch features: User accounts 1, 5, Access rights, Systeminformation, Trap destinations, Spanning tree2, IGMP.Port features: Security 1, Spanning tree 2, Administration,Autonegotiation.Device Family Supported Features
