466 CHAPTER 11: CREATING R EPORTSTable 81 Available Columns for ‘Link DetailsWhen generating a link details custom report you may see multipleentries in a table cell for a link, for example two entries for Resilience. Thelink in question is an aggregated link and is listing the properties of eachlink that composes the aggregated link.Column DescriptionComment(Both ends)The comment associated with the devices at either end of the link.Device Name(Both Ends)Gives the names of the devices at either end of link.Duplex mode The duplex mode of the link.IP Address(Both Ends)Gives the IP addresses of the devices at either end of link.LinkAggregationWhether link aggregation is enabled or disabled for the link.Media Type The media type of the link for example, Ethernet.Port (Bothends)Gives port number that either end of link is connected to.Registered(Both Ends)Whether or not the devices at either end have been registered forDevice Warranty using the Device Warranty Wizard.ResilienceModeWhether resilience is enabled for the link.Spanning TreeModeThe spanning tree mode of the link for example, Blocked.Speed The speed of link e.g. 10 Mbps.Unit (BothEnds)Gives the unit numbers of the devices that either end of link isconnected to.
