3Com OfficeConnect 3C100XF Cli User's Manual

Also see for OfficeConnect 3C100XF: Quick start guide

Contents

3Com OfficeConnect 3C100XF Cli User's Manual Manual pdf 122 page image

12-34 CHAPTER 12: IP R OUTING COMMANDS System Name - modify using set system command System Location - site where system is located. Modify using set systemcommand System Services - for example, Internet EndToEnd Applications System Transmit Authentication Name - system-wide keyword for PPP onthe WAN, modified using set system command System Version - loaded release version of the system software.ReconfigureCommandsreconfigure ip networkAutomatically reconfigures IP network parameters of an established static IP LANor PVC network. This command changes network parameters without theadministrator having to remove the router from service by manually disabling thenetwork, modifying its parameters and re-enabling it. This command modifiesstatic IP LAN networks only (cannot change interface and frame values for aninternal address). Network and interface names are limited to 64 ASCII characters.This command has the following parameters:address interface frame [ethernet_ii | snap | atm1483]wan_type [unptp | nptp | network | auto]remote_address Automatically reconfigures IP network parameters of an established static IP LANor PVC network. This command changes network parameters without theadministrator having to remove the router from service by manually disabling thenetwork, modifying its parameters and re-enabling it. This command modifiesstatic IP LAN networks only (cannot change interface and frame values for anSYSTEM DESCRIPTIONSystem Descriptor:3Com Corporation OCG Built on Mar 5 2000 at 19:24:.ObjectID:1.3.6.1.4.1.429.2.19System UpTime: 0d 00:56:00System Contact: Ray-ManSystem Name OCGMANSystem Location Steve's LabSystem Services: Internet EndToEndApplicationsSystem Transmit AuthenticationName:OCGSystem Version: V5.0.7