History Commands 1-5History Commands The history command displays previously entered CLI commands. Recallcommands from the history cache by using Ctrl p to recall commands up the list,and Ctrl n to recall commands working down the list.history The default depth is 10 commands. The range is 1-500. You can modify historydepth using the set history <1-500> command.For example:Save All Command The Save All command saves all changes made during your CLI session. Youshould save your changes frequently, just as you would with any type of editor. It isimportant to remember that most commands may be accepted when entered, butnot necessarily saved across reboots until you use the Save All commandsave all When a Save All is in progress, the following message is displayed:When the save is finished, the following message is displayed:Save ConfigurationCommandThe save configuration command saves individual configuration files (.CFG) to abulk configuration file for uploading to the OfficeConnect Gateway.save configuration You can name the bulk configuration file with the set bulk_file command. The reset command breaks out individual configuration files from thebulk configuration file.arparm camusarp camusarp carrotli inthosT cassatthost carrotSaving ... SAVE ALLSaving.....SAVE ALL Complete.
