3Com OfficeConnect 3C100XF Cli User's Manual

Also see for OfficeConnect 3C100XF: Quick start guide

Contents

3Com OfficeConnect 3C100XF Cli User's Manual Manual pdf 176 page image

20-4 CHAPTER 20: NETWORK S ERVICES COMMANDSlist available servers Displays the available network servers and supported network services. Thechoices are SNMP service, TELNET service, or TFTP service. The services listed by thiscommand are used in the server_type field of the add network servicecommand.Set Command The set network service command sets parameters for network services youconfigured with the add network services command. You can list the configurednetwork services using the list network services command. Service must first bedisabled for this command to work. See the add network services command formore information on the Data parameters.set network serviceThe following parameters are associated with this set command:close_active_connections [true | false]data server_type [snmpd | tftpd | telnetd]socket These parameters are described in the following table.tftpd TFTPD 69 FALSE EnabledDATA:telnetd TELNETD 23 FALSE EnabledDATA:Name Server Type Socket Close Admin StatusServerTypeType ProtocolModule DescriptionSNMPD NETWORK UDP SNMPAgent SNMP agent.TELNETD NETWORK TCP Telnet TELNET server, to the CLI.TFTPD NETWORK UDP TFTP Server side of TFTP, foraccessing files.Parameters Description Designation you assigned to network service with the add network servicecommand. The limit is 64 ASCII characters.close_active_connectionsIndicates whether or not to close any active connections when a service isshut by disable network_service. The default is False.Parameters Descriptiondata TELNET Ancillary Data. This field contains server-specific configuration data.See table which lists the configurable ancillary data parameters in the addnetwork service command on page.server_type Type of network service you wish to assign to this administration name.Available services: SNMPD - daemon supports SNMP on socket 161. Uses UDP. TFTPD - daemon supports file transfer service on socket 69. Uses UDP. TELNETD - daemon supports TELNET, to the CLI. Uses TCP.socket The port the server listens on. For TFTP and TELNET, it is the TCP or UDP portnumber. Socket numbers are the joined sender’s (or receiver’s) IP address andservice type’s port number. The range is 0-65535.