3Com OfficeConnect 3C100XF Cli User's Manual

Also see for OfficeConnect 3C100XF: Quick start guide

Contents

3Com OfficeConnect 3C100XF Cli User's Manual Manual pdf 181 page image

Super NAT 21-5Intelligent NAT directs the frame to the local client which currently has otherexisting connection(s) with the remote host. If more than one local client hasexisting connections, then the client who initiated the most recent session ischosen.Super NAT Your OfficeConnect Gateway supports Super NAT. With Super NAT, theOfficeConnect Gateway makes optimum use of available IP addresses, andautomatically switches from NAT to PAT or PAT to NAT as necessary.NAT DefaultWorkstationIt is sometimes necessary to configure the NAT Default Workstation. This fieldshould be set to the private address of a workstation on the local LAN. If a datapacket is received on the WAN port and a port mapping does not exist, the framewill be translated using the Default Workstation.Monitoring NAT Use the following commands to display NAT sessions, statistics and policies:list nat The list nat command displays information for Network Address Translation (NAT)connections. The command has the following parameters:interfacesstatisticsParameter Descriptioninterfaces Displays the Interface Name and NAT optionstats Displays statistics for the Network Address Translation (NAT) connections asshown here:The COUNTER FOR OUTGOING SESSIONSTotal Successfully created sessions: 0Total Failed sessions: 0Total Translated incoming packets: 0Total Discarded incoming packets: 0Total Translated outgoing packets: 0Total Discarded outgoing packets: 0The COUNTER FOR INCOMING SESSIONSTotal Successfully created sessions: 0Total Failed sessions: 0Total Translated incoming packets: 0Total Discarded incoming packets: 0Total Translated outgoing packets: 0Total Discarded outgoing packets: 0policies