Show Commands 13-7set dns server preference name_name anddomain_name> addressThis command redefines the name of a DNS server, which was defined using theadd dns server command. Use the list dns servers command to see thecurrently defined DNS servers.Show Commands This section describes the following DNS Show commands: show dns show dns settings show dns cache <1-65535> show dns ncache <1-65535>show dnsandshow dns settingsThese commands Displays settings for all DNS servers. (Note: the show dnssettings command displays exactly the same information as is displayed for theshow dns command.) Domain Name - default domain name to be used if no domain is specified inthe name to be resolved. Number Retries per Server - number of times the resolve name request willbe sent to each Name Server, if the server fails to respond to a request beforethe timeout period. Timeout Period in Seconds - number of seconds to wait before deciding arequest to a Name Server has timed out. Cache Max TTL - Maximum Time-To-Live period in seconds for resourcerecords in this cache. Negative Cache Max TTL - Maximum Time-To-Live period in seconds fornegative cached authoritative errors. Caching - Indicates whether function is enabled or disabled. Negative Caching - Indicates whether function is enabled or disabled. Host Rotation - Indicates whether function is enabled or disabled.Parameters Descriptionpreference Priority of the name server in name searches from 1 (highest) to 10(lowest).server name Designation - must be unique - given the DNS server. This field isoptional, but is useful for keeping track of name servers. You canalso supply the domain name. The limit is 64 ASCII characters.address IP address of the DNS server.DNS SETTINGSDomain Name eden-usr.comNumber Retries perServer:1Timeout Period inSeconds:5Cache Max TTL: 2147483Negative Cache Max TTL 2147483Caching: ENABLEDNegative Caching: ENABLEDHost Rotation: ENABLED
