25-8 CHAPTER 25: SNMP C OMMANDS Validate Address - Method selected to determine access to this trapcommunity. The use_address command uses a specified IP address to validateaccess, use_pool uses a list of IP addresses to validate access.The information displayed by this command is shown in the following example.list snmptrap_community_poolsThe list snmp trap_community_pools command displays all SNMP trapcommunity pools in the SNMP Trap Community Address Pool defined using theadd snmp trap_community_pool command.The following information is displayed when this List command is used: Name - designation of the trap community pool Number of Addresses - Sum of IP addresses associated with the specified trapcommunity poolSet Commands This section describes the following Set-related SNMP commands: set snmp communities set snmp trap community set snmp communityThe set snmp community command modifies parameters for an SNMPcommunity (authorized user or host to which notifications are sent) configuredwith the add snmp community command. The communityname and IP address of SNMP requests from managers on the network mustmatch the list, which you can view using the list snmp communities command.The following parameters are associated with the set snmp community command:access [ro | rw | adm]address community_pool validate_address [use_address | use_pool]SNMP TRAP COMMUNITIESCommunity NameIP Address Community Pool ValidateAddressKensington useAddressKerby usePoolKenwood1.1.1.3useAddressTRAP COMMUNITY POOLSName Number ofAddressesJoisy 5
