3-10 CHAPTER 3: ADMINISTRATIVE CLI COMMANDSRename Commandrename file The rename file command copies files within the FLASH file system. The FLASHfile system is a flat file system (no subdirectories). Use the list files command toview currently existing files.Show Commandshow fileThe show file command displays the contents of an ASCII file.For example:show file hexThe show file hex command displays the contents of ahexadecimal file. For example (log-file.local):old-log-file.local 3924 FILE_READ_WRITEuser_settings.cfg 1971 FILE_READ_WRITETotal Sectors Allocated sectors Deleted Sectors Free SectorsMinimumFree Sectors7168 1649 128 5391 1075Atmarp.cfg 0 FILE_READ_WRITECLI.cfg 41 FILE_READ_WRITEParameters Description Name of the original file. New name for the fileOCG>> show file easyfilter.fil#filter#IP:#10 reject src-address = 220.159.132.13;#20 accept src-address!= 220.159.132.13#30 reject udp-src-port = 69;#40 reject tcp-src-port = 23;#50 reject udp-dst-port = 69#60 reject tcp-dst-port = 23;000000 43453035 43453031 41742031 363a3537 CE05CE01At16:570010 3a31342c 20466163 696c6974 79202255 14, Facility"User0020 73657220 4d616e61 67657222 2c204c65 Manager",000030 76656c20 22435249 54494341 4c223a3a Level"CRITICAL":000040 20415554 483a204e 6f206163 6b6e6f77 AUTH: Noacknow000050 6c656467 656d656e 74206672 6f6d2052 ledgementfrom000070 20736572 76657273 2c207265 61636865 servers,reached
