Add Commands 12-3Add Commandsadd ip defaultroutegateway name> metric Allows a default route to be configured. The command adds a default route with agateway on the IP network configured on the OfficeConnect Gateway LANinterface (eth:1), or on a PVC interface. This allows a default route to beconfigured.A default route gateway specified with a lower metric acts as the primary defaultroute gateway and a second default route gateway with a higher metric acts asthe secondary default route gateway.If one interface goes down, the default route gateway associated with thatinterface is disabled. If a second default route gateway associated with a still-aliveShow show all ip networksshow ip countersshow ip rip countersshow ipshow ip settingsshow ip network show ip network settingsshow ip routingshow ip routing settingsshow all active interfacesshow all connectionsshow all filtersshow all interfacesshow all ip networksshow all lan interfacesshow all networksshow command settingsshow configuration, show configuration settingsshow maximum_local_usersshow memoryshow memory utilizationshow ip source_based_routing show network , show network settingsshow packet_logging, show packet_logging settingsshow session show system, show system settingsReconfigure reconfigure ip network
