4-4 CHAPTER 4: CONFIGURING AND MANAGING USERSset framed_route userSpecifies a framed (static) network to the user profile for dialup connections. Youcan configure the following parameters for this command:gateway ip_route metric Specifies a framed (static) network to the user profile for dialup connections.set maximum_local_usersConfigures the total number of users that can be created locally on theOfficeConnect Gateway. See the show maximum_local_users command todisplay settings. The maximum is 1024.List Command The list users command displays all users and parameters specified using the addand set user commands.list users It lists the following information: User Name - user designation specified using the add user command Login Service - TELNET, RLOGIN, ClEARTCP, TELNET Network Service - type of network service. Default is PPP. Status - link status. ACTIVE (in use), INACTIVE (not in use) or DISABLED(inactivated)telnet_options binary - Enables binary transfers during telnet sessions.escape - Enables escape sequences during telnet sessions.Entering this parameter with a no value disables that function. Forexample; the command set user telnet_option binaryescape enables both the binary and escape telnet options. Thecommand set user telnet_option escape disables thebinary telnet option but leaves the escape option enabled.type Type of user added. A user may be one or more types but callback anddialout are mutually exclusive. Login users are TCP users who use the login_service specified. Network users are framed protocol users, who use thenetwork_service specified. Manage users with system administration authority. Manage_Readonly users with read-only access.Parameters Description User name specified for the framed network.gateway IP address of the gateway used to reach this remote network.ip_route IP address of the remote networkmetric Integer representing how far away the route is, in “hops” from otherrouters. The range is 1-15.
