4-2 CHAPTER 4: CONFIGURING AND MANAGING USERSThe add user command parameters are described in the following table.add address_pool userAssigns a user to a previously configured address pool. The command has thefollowing parameter:pool_name When creating an address pool user, be sure to verify that a valid address poolexists.Delete Commandsdelete user The delete user command deletes a user you previously added to theLocal User Table. Use list users to see the currently defined user.delete address_pool user pool_nameRemoves a user previously assigned to the specified address pool with the addaddress_pool user command.Enable Commandenable user The enable user command allows a user to establish a session with theOfficeConnect Gateway. Use the add user command to add a user. Use the listusers command to see the current state of all users.Disable Commanddisable user The disable user command disables the specified user from being used.This affects LAN and WAN connections that depend on that user for parameters. ItParameters Description[name] Name of user to be added, up to 64 ASCII characters. The limit is Nomore than 451 local users.enabled Optional. Indicates whether the user is enabled (YES) or disabled (NO)by this command.login_service Protocol to be used for a login user. Options are: RLOGIN TELNET (default)password User password (optional). The limit is 127 ASCII characters. You cancreate a null password with: password “”.type Type of user - may be one or more types. Login uses the login_service specified. Network Manage users have administrative authority. Manage_readonly users do not have administrative authority
