3Com OfficeConnect 3C100XF Cli User's Manual

Also see for OfficeConnect 3C100XF: Quick start guide

Contents

3Com OfficeConnect 3C100XF Cli User's Manual Manual pdf 24 page image

1-6 CHAPTER 1: USING THE COMMAND L INE INTERFACE (CLI)Page Break Commands The Terminal Settings Page Break commands lets an Administrative user to enableor disable page breaks for commands which display text that would overflow theboundaries of the display screen.The Terminal Settings Page Break commands can be applied globally or locally.enable commandglobal_terminal_settings_page_breaksAllows an administrative user to globally (for all OfficeConnect Gateway sessions)enable page breaks for commands which display text - list, show, etc. - that wouldotherwise overflow the boundaries of the display screen.To set the number of rows displayed globally and locally see the set command.disable commandglobal_terminal_settings_page_breaksDisallows page breaks for all users.disable commandlocal_terminal_settings_page_breaksDisallows page breaks for locally (the present session only) connected users.enable commandlocal_terminal_settings_page_breaksAllows an administrative user to locally (for the present session only) enable pagebreaks for commands which display text - list, show, etc. - that would otherwiseoverflow the boundaries of the display screen.To set the number of rows displayed globally and locally see the set command.Command LineCommandsThe set command lets you configure the following command line parameters:set command The set command has the following parameters:global_terminal_settings_rows history idle_timeout local_prompt local_terminal_settings_rows login_required [no | yes]prompt These command line parameters are described in the following table.Parameters Descriptionglobal_terminal_settings_rowsConfigures the page size (number of rows) output by CLI commands tosubsequent OfficeConnect Gateway-connected sessions of administrativeusers. This command is not effective for currently connected users. The rangeis 1-256. The default is 23.history Sets depth of the buffer holding command history. Use history command tosee current depth and list of your last CLI commands. The default is 10commands. The range is 1-500.idle_timeout Sets login connection to close after being idle for the specified interval, if thatuser is required to log in (login_required), value must be set to YES. The rangeis 0-60 minutes. The default is 5 min. Zero (0) value produces no timeout. Thisvalue can be changed only by an Administrative user.