3-12 CHAPTER 3: ADMINISTRATIVE CLI COMMANDSReset Commandreset Use the reset command to restore the following OfficeConnect Gateway settingsto their factory default configuration values.configurationDHCP_client_networkDHCP_server_settingsDHCP_server_countersDHCP_proxy_counterspppoe countersThe following table describes these settings.Also see the set bulk_file command.Set Commandset reset_action |none>The set reset_action command lets you disablethe ability to manually restore factory default settings by pressing and holding thereset button, combined with a power cycle.CAUTION: We recommend that you not use this command unless you are anexpert user. Using this command and disabling the manual restore will result in anunusable OfficeConnect Gateway unit.Reset reset configurationreset DHCP_client_networkreset DHCP_server_settingsreset DHCP_server_countersreset DHCP_proxy_countersreset pppoe countersSet Set reset_actionShow Show reset_actionParameters Descriptionconfiguration Restores individual OfficeConnect Gateway configuration files(.CFG) from a bulk configuration file. The bulk configurationfunction reads all configuration files generated by theOfficeConnect Gateway processes and concatenates them into asingle compressed file which can then be uploaded by theOfficeConnect Gateway. A bulk configuration file can be namedusing the set bulk_file command.DHCP_client_network Resets DHCP client network settings to default values.DHCP_server_settings Restores the DHCP server settings to initial default values.DHCP_proxy_counters Resets the DHCP Proxy counters.pppoe counters Resets the PPPoE session counters.
