2-4 CHAPTER 2: LIST OF OFFICECONNECT GATEWAY CLI COMMANDSLOGOUT Command Use the LOGOUT command to quit and logout of the Console Telnet CLI session.PING Command Use the PING command to send an ICMP echo request to a remote IP host A replyfrom the pinged address indicates success.QUIT Command Use the QUIT command to quit the Console Telnet CLI session.REBOOT Command Use the REBOOT command to reboot the OffIceConnect Gateway. Make sure thatyou save your changes using the SAVE ALL command before rebooting.RECONFIGURECommandUse the RECONFIGURE IP command to automatically reconfigure IP networkparameters of an established static IP LAN or PVC network.RENAME Command Use the RENAME command to rename files within the FLASH file system.RESET Commands Use the RESET command to reset the following parameters:RESOLVE Command Use the RESOLVE NAME command to return an IP address for a specified hostname to DNS for resolution.RLOGIN Command Use the RLOGIN command to establish a remote login Console Telnet CLI session.SAVE Command Use the SAVE ALL and SAVE CONFIGURATION commands to save your CLIchanges. The SAVE ALL command will permanently save your changes.SET Commands Use the SET command to edit the following system parameters:POLICY PPP PPPOE PPPOE_CLIENTPPTP PROCESSES PROFILES RTABSA SESSIONS SNMP SYSLOGSTCP TELNET TFTP TIMEZONETRACEROUTE TUNNEL TUNNELS UDPUSERS VIRTUAL VOICECONFIGURATION DHCP_PROXY DHCP_CLIENT DHCP_SERVERPPPOEBOOTB_MGR BRIDGE BULK_FILE CLEARTCPCOMMAND DATE DHCP_PROXY DHCP_SERVERDNS FACILITY FRAMED_ROUTE FTPHTTP_SERVER ILMI INTERFACE IPL2TP MAXIMUM_LOCAL_USERS NAT NETWORK
