3Com OfficeConnect 3C100XF Cli User's Manual

Also see for OfficeConnect 3C100XF: Quick start guide

Contents

3Com OfficeConnect 3C100XF Cli User's Manual Manual pdf 229 page image

Add Commands 28-3 Status - State of each current TFTP request in the table: Normal - Request is in the table or has been successfully completed Getting - Initial state: TFTP server is receiving a file Putting - Initial state: TFTP server is sending a file Error - Request has finished unsuccessfully and will generate an errormessageAdd Commands This section describes the following Add-related TFTP commands: add tftp client add tftp request add tftp clientThe add tftp client command adds the tftp client to the Authorization Table forTFTP access.The parameters for this command are described in the following table.add tftp requestThe add tftp request command adds entries to the TFTP Client Request Table.Entries are the names of files either requested from or sent to the TFTP server. Thecommand is useful for administrators seeking to access the TFTP clientOfficeConnect Gateway. The following parameters are associated with thiscommand:action [get | b]server mode [ascii | octet]rexmt _timeout <1-60>max_timeout <1-300>These parameters are described in the following table.TFTP REQUEST TABLEFilename Server Action Statusfilter.in Scylla PUT NORMALOCG Styx GET GETTINGParameters Description Host name or IP address of a host to be added. An address of0.0.0.0 allows all clients TFTP access.Parameters Description Designation of file to be requested from or sent to the TFTP server. Thelimit is 32 ASCII characters.action Type of request sent to the TFTP server. Choices: put or getserver Name or IP address of the TFTP server.mode The text format the file is transmitted as. Choices: ascii or octet(binary). The default is ascii.rexmt_timeout Retransmission timeout - interval in seconds OfficeConnect Gatewaywaits for a reply from the TFTP server before retransmitting a TFTPrequest. The range is 1-60. The default is 5 seconds.