Chapter 2 Installing the Desktop Manager Software 2-7Installing theDesktop ManagerSoftware❏ After installation, when you open the MultiPASS Status Monitor(which occurs automatically when you start Windows)❏ After installation, when you save a change to the setup options in theDesktop Manager (as described in Chapter 8, “MultiPASS PrinterSetup and Other Utilities in the Desktop Manager”).When setting options, a message appears to remind you that theMultiPASS printer options set on the operation panel will beoverwritten if set in the Desktop Manager.You can choose to proceed with the update, overwriting the settingsin the MultiPASS printer, or you can cancel the action. Whencancelling, you can first record your settings on the MultiPASSprinter. This enables you to re-enter them in the Desktop Managerwhen you resume operations.Setting the Default PrinterWhen you install the printer driver software, the system automaticallysets the MultiPASS printer as the default printer. If necessary, however,follow these instructions to set the default printer.To set the default printer:1. On the Windows desktop, click Start, and then point to Settings.2. On the Settings menu, click Printers.3. In the Printers window, click the MultiPASS printer icon.4. On the File menu, click Set As Default.
