3-34 Printing with the MultiPASS Printer Chapter 3z Super PhotoClick Super Photo when you want to make an exact replica of anoriginal photo image. Super Photo is most effective when used inconjunction with the Photo BJ cartridge and high resolution paper.z OHPClick OHP if you want to print on transparencies.z DraftClick Draft if you would like to print your document quickly butwith a lower print quality. The Draft print mode is ideal for longerdocuments and proofreading purposes.The Printer Illustration area shows the settings for the current printmode.The Description box displays a simple explanation or note about theselected print mode.Changing the Print Mode SettingsYou can temporarily change the settings of a factory-defined print mode, toprint your current document. You can also define and save a custom printmode to fit the needs of a particular print job. Once saved, a custom printmode can be changed and resaved. If you do not save a custom print mode,it is available only for the current print job.The following instructions summarise the procedures for changing printmode settings.To change print mode settings:1. In the Printer Properties dialog box, on the Main tab, click the printmode you want to change. Then click Change.2. In the Properties dialog box, specify your desired print mode settingson the Quality and Colour tabs.3. If you want to save your settings to print future documents, click theSave tab and save your settings as a custom print mode.
