Chapter 3 Printing with the MultiPASS Printer 3-21Printing with theMultiPASSPrinterTo set your banner printing options and print your banner:1. From within the application that you used to create the banner, clickthe Print command.2. In the Print dialog box, under Print Range, specify the range of thepages to print.Remember that you cannot print on the first page of your bannerpaper. Thus, if you want to print a banner that is the maximum length,under Print Range, specify printing from page 2 to page 6 for a total offive actual printed pages.3. Click Properties.4. In the Printer Properties dialog box, on the Main tab, select the printmode.5. Click Advanced.6. In the Properties dialog box, on the Quality tab, select Plain Paper inthe Media Type box. Then click OK.7. In the Printer Properties dialog box, on the Paper tab, select yourbanner paper size in the Page Size box. Then select Banner Printing.8. In the MultiPASS printer message box, click OK. Then in the PrinterProperties dialog box, click OK.9. In the Print dialog box, click the print command (usually OK or Print).Your banner is printed by your MultiPASS printer.Setting Other Print FeaturesYou set the following options on the Features tab in the Printer Propertiesdialog box.
