Canon MultiPASS C80 Software User's Manual

Also see for MultiPASS C70: User guide User guide

Contents

8-28 MultiPASS Printer Setup and Other Utilities in the Desktop Manager Chapter 8When you have corrected the situation, the status messageautomatically clears.❏❏❏❏❏ Downloading User SettingsThis status indicates that the Desktop Manager is saving setupinformation to the MultiPASS printer, overriding the information youmay have set manually on the MultiPASS printer.Disconnecting the MultiPASS PrinterYou can disconnect the MultiPASS printer if you want to use the parallelport for another purpose.The MultiPASS system automatically detects if a different device isconnected to the port, and stops any communication between theMultiPASS printer and Desktop Manager. Later, when you reconnect theMultiPASS printer, you must restart the communication between theMultiPASS printer and the MultiPASS system on your computer.To disconnect the MultiPASS printer:1. Turn off your computer.2. Unplug your computer from all electrical sources.3. Unplug the MultiPASS printer from all electrical sources.4. On the back of your computer, remove the cable connector from theparallel printer port.5. On the MultiPASS printer, release the wire clips and remove the cableconnector from the port.6. Plug your computer back in to the electrical source.