Access Control Lists (ACL) | 117UsageInformationThe order option is relevant in the context of the Policy QoS feature only. The following applies:• The seq sequence-number is applicable only in an ACL group.• The order option works across ACL groups that have been applied on an interface via QoS policyframework.• The order option takes precedence over the seq sequence-number.• If sequence-number is not configured, then rules with the same order value are orderedaccording to their configuration order.• If the sequence-number is configured, then the sequence-number is used as a tie breaker forrules with the same order.If the sequence-number is configured, then the sequence-number is used as a tie breaker for ruleswith the same order.RelatedCommandsCommon MAC Access List CommandsThe following commands are available within both MAC ACL modes (Standard and Extended) and donot have mode-specific options.The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs.The following commands allow you to clear, display and assign MAC ACL configurations.• clear counters mac access-group• mac access-group• show mac access-lists• show mac accounting access-listclear counters mac access-groupClear counters for all or a specific MAC ACL.Syntax clear counters mac access-group [mac-list-name]ParametersCommand Modes EXEC PrivilegeCommandHistorydeny Configures a filter to drop packets.permit Configures a filter to forward packets.mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module