618 | Stacking Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m CommandHistoryRelatedCommandsstack-unit priorityConfigure the ability of an MXL 10/40GbE switch to become the management unit of a stack.Syntax stack-unit 0-5 priority 1-14ParametersDefaults 0Command Modes CONFIGURATIONCommandHistoryRelatedCommandsstack-unit provisionPre-configure a logical stacking ID of a switch that will join the stack. This is an optional commandthat is executed on the management unit.Syntax stack-unit 0-5 provision {MXL-10/40GbE}ParametersCommand Modes CONFIGURATIONCommandHistoryRelatedCommandsVersion 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Modulereload Reboots FTOS.show system Displays the current status of all stack members or a specific member.show system stack-unitstack-groupDisplay the stack-groups present/configured for a MXL 10/40GbE switch stackunit.0-5 Enter the stack member unit identifier, from 0 to 5, of the switch on which you want to set themanagement priority.1-14 This preference parameter allows you to specify the management priority of one backup switchover another, with 1 the lowest priority and 14 the highest.The switch with the highest priority value will be chosen to become the management unit.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Modulereload Reboots FTOS.show system Displays the current status of all stack members or a specific member.0-5 Enter a stack member identifier, from 0 to 5, of the switch that you want to add to thestack.MXL-10/40GbE Enter the model identifier of the switch to be added as a stack member. Thisidentifier is also referred to as the provision type.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Modulereload Reboots FTOS.show system Displays the current status of all stack members or a specific member.
