Virtual Router Redundancy Protocol (VRRP) | 669Example Figure 38-2. show vrrp brief Command ExampleFTOS>Interface Grp Pri Pre State Master addr Virtual addr(s)Description------------------------------------------------------------------------------TenGig 10/37 1 100 Y Master 200.200.200.200 200.200.200.201TenGig10/37 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203DescriptionTenGig10/37 3 100 Y Master 1.1.1.1 1.1.1.2TenGig10/37 4 100 Y Master 200.200.200.200 200.200.200.206 200.200.200.207 ... shortdescFTOS>Table 38-1. show vrrp brief Command DescriptionItem DescriptionInterface Lists the interface type, slot and port on which the VRRP group isconfigured.Grp Displays the VRRP group ID.Pri Displays the priority value assigned to the interface.If the track command is configured to track that interface and the interfaceis disabled, the cost is subtracted from the priority value assigned to theinterface.Pre States whether preempt is enabled on the interface.• Y = Preempt is enabled.• N = Preempt is not enabled.State Displays the operational state of the interface by using one of thefollowing:• NA/IF (the interface is not available).• MASTER (the interface associated with the MASTER router).• BACKUP (the interface associated with the BACKUP router).Master addr Displays the IP address of the MASTER router.Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with theinterface.
