656 | VLAN Stackingw w w . d e l l . c o m | s u p p o r t . d e l l . c o m • Dell Force10 recommends not using the same MAC address, on different customer VLANs, on thesame stackable VLAN.• Interfaces configured using stackable VLAN access or stackable VLAN trunk commands do notswitch traffic for the default VLAN. These interfaces switch traffic only when they are added to anon-default VLAN.dei enable Make packets eligible for dropping based on their drop eligible indicator (DEI) value.Syntax dei enableDefaults Packets are colored green; no packets are dropped.Command Mode CONFIGURATIONCommandHistorydei honor Honor the incoming DEI value by mapping it to an FTOS drop precedence. You can enter thecommand once for 0 and once for 1.Syntax dei honor {0 | 1} {green | red | yellow}ParametersDefaults Disabled; packets with an unmapped DEI value are colored green.Command Mode INTERFACECommandHistoryUsageInformationYou must first enable DEI for this configuration to take effect.RelatedCommandsVersion 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module0 | 1 Enter the bit value you want to map to a color.green | red| yellowChoose a color:• Green: High priority packets that are the least preferred to be dropped.• Yellow: Lower priority packets that are treated as best-effort.• Red: Lowest priority packets that are always dropped (regardless of congestionstatus).Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduledei enable Enables DEI.