Access Control Lists (ACL) | 139set metric Configure a filter to assign a new metric to redistributed routes.Syntax set metric [+ | -] metric-valueTo delete a setting, use the no set metric command.ParametersDefaults Not configuredCommand Modes ROUTE-MAPCommandHistoryRelatedCommandsset metric-typeConfigure a filter to assign a new route type for routes redistributed to OSPF.Syntax set metric-type {internal | external | type-1 | type-2}ParametersDefaults Not configured.Command Modes ROUTE-MAPCommandHistoryRelatedCommands+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.metric-value Enter a number as the new metric value.Range: zero (0) to 4294967295Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleset automatic-tag Computes the tag value of the route.set metric-type Specifies the route type assigned to redistributed routes.set tag Specifies the tag assigned to redistributed routes.internal Enter the keyword internal to assign the Interior Gateway Protocol metric of the nexthop as the route’s BGP MULTI_EXIT_DES (MED) value.external Enter the keyword external to assign the IS-IS external metric.type-1 Enter the keyword type-1 to assign the OSPF Type 1 metric.type-2 Enter the keyword type-2 to assign the OSPF Type 2 metric.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleset automatic-tag Computes the tag value of the route.set metric Specifies the metric value assigned to redistributed routes.set tag Specifies the tag assigned to redistributed routes.
