468 | Quality of Service (QoS)w w w . d e l l . c o m | s u p p o r t . d e l l . c o mbandwidth-percentageAssign a percentage of weight to class/queue.Syntax bandwidth-percentage percentageTo remove the bandwidth percentage, use the no bandwidth-percentage command.ParametersDefaults noneCommand Modes CONFIGURATION (conf-qos-policy-out)CommandHistoryUsageInformationThe unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and will disable thescheduling of that class. If the sum of the bandwidth percentages given to all four classes exceeds100%, the bandwidth percentage will automatically scale down to 100%.RelatedCommandsclass-map Create/access a class map. Class maps differentiate traffic so that you can apply separate quality ofservice policies to each class.Syntax class-map {match-all | match-any} class-map-name [layer2]ParametersDefaults Layer 3Command Modes CONFIGURATIONCommandHistorypercentage Enter the percentage assignment of weight to class/queue.Range: 1 to 100% (granularity 1%)Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleqos-policy-output Creates a QoS output policy.match-all Determines how packets are evaluated when multiple match criteria exist.Enter the keyword match-all to determine that the packets must meet allthe match criteria in order to be considered a member of the class.match-any Determines how packets are evaluated when multiple match criteria exist.Enter the keyword match-any to determine that the packets must meet atleast one of the match criteria in order to be considered a member of theclass.class-map-name Enter a name of the class for the class map in a character format (32character maximum).layer2 Enter the keyword layer2 to specify a Layer 2 Class Map.Default: Layer 3Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
