Private VLAN (PVLAN) | 443show interfaces private-vlanDisplay type and status of PVLAN interfaces.Syntax show interfaces private-vlan [interface interface]ParametersDefaults noneCommand Modes EXECEXEC PrivilegeCommandHistoryUsageInformationThis command has two types of display — a list of all PVLAN interfaces or for a specific interface.Examples of both types of output are shown below.Examples Figure 23-1. show interfaces private-vlan Command ExampleFigure 23-2. show interfaces private-vlan (Specific) Command ExampleTable 23-1 defines the fields in the output, above.RelatedCommandsinterface interface (OPTIONAL) Enter the keyword interface, followed by the ID of the specificinterface for which to display PVLAN status.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO ModuleTable 23-1. show interfaces Command DescriptionField DescriptionInterface Displays type of interface and associated slot and port numberVlan Displays the VLAN ID of the designated interfacePVLAN-Type Displays the type of VLAN in which the designated interface residesInterface Type Displays the PVLAN port type of the designated interface.Status States whether the interface is operationally up or down.FTOS# show interfaces private-vlanInterface Vlan PVLAN-Type Interface Type Status--------- ---- ---------- -------------- --------TenGig 2/1 10 Primary Promiscuous UpTenGig 2/2 100 Isolated Host DownTenGig 2/3 10 Primary Trunk UpTenGig 2/4 101 Community Host UpFTOS# show interfaces private-vlan TenGig 2/2Interface Vlan PVLAN-Type Interface Type Status--------- ---- ---------- -------------- --------TenGig 2/2 100 Isolated Host Upprivate-vlan mode Sets the mode of the selected VLAN to community, isolated, or primary.show vlan private-vlan Displays the PVLANs and/or interfaces that are part of a PVLAN.