Interfaces | 283Figure 14-43. show interfaces port-channel brief Command ExampleRelatedCommandsOutput 0... Displays the type and number of packets sent out the interface. Thisinformation is displayed over three lines.Rate information... Displays the traffic rate information into and out of the interface. Trafficrate is displayed in bits and packets per second.Time since... Displays the time since the last change in the configuration of thisinterface.Table 14-11. show interfaces port-channel brief Command Example FieldsField DescriptionLAG Lists the port channel number.Mode Lists the mode:• L3 - for Layer 3• L2 - for Layer 2Status Displays the status of the port channel.• down - if the port channel is disabled (shutdown)• up - if the port channel is enabled (no shutdown)Uptime Displays the age of the port channel in hours:minutes:seconds.Ports Lists the interfaces assigned to this port channel.(untitled) Displays the status of the physical interfaces (up or down).In Layer 2 port channels, an * (asterisk) indicates which interface is theprimary port of the port channel. The primary port sends out interfacePDU.In Layer 3 port channels, the primary port is not indicated.Table 14-10. show interfaces port-channel Command Example Fields (continued)Field DescriptionFTOS#show int po 1 briefCodes: L - LACP Port-channelLAG Mode Status Uptime Ports1 L3 down 00:00:00 Te 0/16 (Down)FTOS#show lacp Displays the LACP matrix.
