418 | Open Shortest Path First (OSPFv2)w w w . d e l l . c o m | s u p p o r t . d e l l . c o mshow ip ospf database opaque-asDisplay the opaque-as (type 11) LSA information.Syntax show ip ospf process-id database opaque-as [link-state-id] [adv-router ip-address]ParametersCommand Modes EXECEXEC PrivilegeCommandHistoryRelatedCommandsshow ip ospf database opaque-linkDisplay the opaque-link (type 9) LSA information.Syntax show ip ospf process-id database opaque-link [link-state-id] [adv-router ip-address]ParametersCommand Modes EXECEXEC PrivilegeCommandHistoryRelatedCommandsprocess-id Enter the OSPF Process ID to show a specific process.If no Process ID is entered, command applies only to the first OSPF process.link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value dependson the LSA type, and it can be one of the following:• the network’s IP address for Type 3 LSAs or Type 5 LSAs• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs• the default destination (0.0.0.0) for Type 5 LSAsadv-routerip-address(OPTIONAL) Enter the keywords adv-router ip-address to display only the LSAinformation about that router.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleshow ip ospf database Displays OSPF database information.process-id Enter the OSPF Process ID to show a specific process.If no Process ID is entered, command applies only to the first OSPF process.link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value dependson the LSA type, and it can be one of the following:• the network’s IP address for Type 3 LSAs or Type 5 LSAs• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs• the default destination (0.0.0.0) for Type 5 LSAsadv-routerip-address(OPTIONAL) Enter the keyword adv-router followed by the IP address of anAdvertising Router to display only the LSA information about that router.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleshow ip ospf database Displays OSPF database information.
