478 | Quality of Service (QoS)w w w . d e l l . c o m | s u p p o r t . d e l l . c o mservice-policy inputApply an input policy map to the selected interface.Syntax service-policy input policy-map-name [layer2]To remove the input policy map from the interface, use the no service-policy input policy-map-name[layer2] command.ParametersDefaults Layer 3Command Modes INTERFACECommandHistoryUsageInformationA single policy-map can be attached to one or more interfaces to specify the service-policy for thoseinterfaces. A policy map attached to an interface can be modified.RelatedCommandsservice-policy outputApply an output policy map to the selected interface.Syntax service-policy output policy-map-nameTo remove the output policy map from the interface, use the no service-policy outputpolicy-map-name command.ParametersDefaults noneCommand Modes INTERFACECommandHistorypolicy-map-name Enter the name for the policy map in character format (16 charactersmaximum). You can identify an existing policy map or name one thatdoes not yet exist.layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map.Default: Layer 3Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO ModuleNote: The service-policy commands are not allowed on a port channel.The service-policy input policy-map-name command and the service-class dynamic dot1pcommand are not allowed simultaneously on an interface.policy-map-input Creates an input policy map.policy-map-name Enter the name for the policy map in character format (16 charactersmaximum). You can identify an existing policy map or name one thatdoes not yet exist.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
