IPv4 Routing | 309RelatedCommandsshow ip cam stack-unitDisplay content-addressable memory (CAM) entries.Syntax show ip cam stack-unit 0-5 port-set pipe-number [ip-address mask [longer-prefixes] | detail |member-info | summary]ParametersCommand Modes EXECEXEC PrivilegeCommandHistoryFlags Classifies the entry as one of the following:• perm - the entry was manually configured and will not time out• temp - the entry was learned and will time out after 72 hours of inactivity.Also included in the flag is an indication of the validity of the route:• ok - the entry is valid.• ex - the entry expired.• ?? - the entry is suspect.TTL Displays the amount of time until the entry ages out of the cache. For dynamicallylearnt entries only.Type Displays IP as the type of entry.Address Displays the IP address(es) assigned to the host.Table 15-4. show hosts Command Example Fields (continued)Field Descriptiontraceroute Views the DNS resolutionip host Configures a host.0-5 Enter the stack-unit ID, from 0 to 5.pipe-number Enter the number of the Port-Pipe number.Range: 0 to 0ip-address mask[longer-prefix](OPTIONAL) Enter the IP address and mask of a route to CAM entries for that routeonly.Enter the keyword longer-prefixes to view routes with a common prefix.detail Enter the keyword detail to display the group index ID used by the ecmp routes inthe CAM.member-info Enter the keyword member-info to display the group index used by the ecmp, thenumber of egress ports (members) for the ecmp, and the port details of each member.The detail information under member-info will give the MAC address, VLANID and gateway of every member port of the ecmp.summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes andthe total number routes which can be entered in to CAM.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module