342 | Layer 2w w w . d e l l . c o m | s u p p o r t . d e l l . c o m UsageInformationThis is supported on physical interfaces, static LAGs, and LACP LAGs.RelatedCommandsmac learning-limit resetReset the MAC address learning-limit error-disabled state.Syntax mac learning-limit resetDefaults noneCommand Modes EXECEXEC PrivilegeCommandHistoryshow cam mac stack-unitDisplay the Content Addressable Memory (CAM) size and the portions allocated for MAC addressesand for MAC ACLs.Syntax show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id] [interface interface]Parametersshow mac learning-limit Displays details of the mac learning-limit.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Modulestack-unit unit_number (REQUIRED) Enter the keyword stack-unit followed by a stack membernumber to select the stack unit for which to gather information.Range: 0 to 5port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe numberto select the Port-Pipe for which to gather information.Range: 0address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address inthe nn:nn:nn:nn:nn:nn format to display information on that MAC address.dynamic (OPTIONAL) Enter the keyword dynamic to display only those MACaddresses learned dynamically by the switch.static (OPTIONAL) Enter the keyword static to display only those MAC addressspecifically configured on the switch.
