224 | GARP VLAN Registration (GVRP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m toGVRP Participants running on no portsRelatedCommandsshow gvrp statisticsDisplay the GVRP configuration statistics.Syntax show gvrp statistics {interface interface | summary}ParametersDefaults noneCommand Modes EXECEXEC PrivilegeCommandHistoryExample Figure 12-3. show gvrp statistics Command ExampleUsageInformationInvalid messages/attributes skipped can occur in the following cases:• The incoming GVRP PDU has an incorrect length.• “End of PDU” was reached before the complete attribute could be parsed.• The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type(0x01).show gvrp statistics Displays the GVRP statistics.interface interface Enter the keyword interface followed by one of the interface keywords and slot/port or number information:• For a Port Channel interface, enter the keyword port-channel followed by anumber: Range: 1-128• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet followed by the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followedby the slot/port information.summary Enter the keyword summary to display just a summary of the GVRP statistics.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO ModuleFTOS#show gvrp statistics int tengig 1/0Join Empty Received: 0Join In Received: 0Empty Received: 0LeaveIn Received: 0Leave Empty Received: 0Leave All Received: 40Join Empty Transmitted: 156Join In Transmitted: 0Empty Transmitted: 0Leave In Transmitted: 0Leave Empty Transmitted: 0Leave All Transmitted: 41Invalid Messages/Attributes skipped: 0Failed Registrations: 0FTOS#