294 | IPv4 Routingw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Command Modes EXEC PrivilegeCommandHistorydebug arp View information on ARP transactions.Syntax debug arp [interface] [count value]To stop debugging ARP transactions, use the no debug arp command.ParametersDefaults noneCommand Modes EXEC PrivilegeCommandHistoryUsageInformationUse the count option to stop packets from flooding the user terminal when debugging is turned on.debug ip dhcpEnable debug information for DHCP relay transactions and display the information on the console.Syntax debug ip dhcpTo disable debug, use the no debug ip dhcp command.Defaults Debug disabledCommand Modes EXEC PrivilegeCommandHistoryVersion 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleinterface (OPTIONAL) Enter the following keywords and slot/port or number information:• For the Management interface, enter the keyword managementethernet followedby the slot/port information. The slot range is 0 and the port range is 0.• For a Port Channel interface, enter the keyword port-channel followed by a number:Range: 1-128• For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet followedby the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by theslot/port information.• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.count value (OPTIONAL) Enter the keyword count followed by the count value.Range: 1 to 65534Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO ModuleVersion 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
