598 | Simple Network Management Protocol (SNMP) and Syslogw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Defaults 7 or debuggingCommand Modes CONFIGURATIONCommandHistoryRelatedCommandslogging facilityConfigure the Syslog facility, used for error messages sent to Syslog servers.Syntax logging facility [facility-type]To return to the default values, use the no logging facility command.ParametersDefaults local7Command Modes CONFIGURATIONVersion 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleclear logging Clears the logging buffer.default logging console Returns the logging console parameters to the default setting.show logging Displays the logging settings and system messages in the internal buffer.facility-type (OPTIONAL) Enter one of the following parameters.• auth (authorization system)• cron (Cron/at facility)• deamon (system deamons)• kern (kernel)• local0 (local use)• local1 (local use)• local2 (local use)• local3 (local use)• local4 (local use)• local5 (local use)• local6 (local use)• local7 (local use)• lpr (line printer system)• mail (mail system)• news (USENET news)• sys9 (system use)• sys10 (system use)• sys11 (system use)• sys12 (system use)• sys13 (system use)• sys14 (system use)• syslog (Syslog process)• user (user process)• uucp (Unix to Unix copy process)The default is local7.
