498 | Routing Information Protocol (RIP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m RelatedCommandsip split-horizonEnable split-horizon for RIP data on the interface. As described in RFC 2453, the split-horizon schemeprevents any routes learned over a specific interface to be sent back out that interface.Syntax ip split-horizonTo disable split-horizon, enter no ip split-horizon.Defaults EnabledCommand Modes INTERFACECommand HistoryRelatedCommandsmaximum-pathsSet RIP to forward packets over multiple paths.Syntax maximum-paths numberTo return to the default values, use the no maximum-paths command.ParametersDefaults 4Command Modes ROUTER RIPCommandHistoryUsageInformationRIP supports a maximum of 16 ECMP paths.neighbor Define a neighbor router with which to exchange RIP information.Syntax neighbor ip-addressTo delete a neighbor setting, use the no neighbor ip-address command.ip rip receive version Sets the RIP version for the interface to receive traffic.version Sets the RIP version to be used for the switch software.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Moduleip poison-reverse Sets the prefix for RIP routing updates.number Enter the number of paths.Range: 1 to 16.The default is 4 paths.Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
