Parameters120 M-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.comLogic Function, continuedPNU IDAccessRUN Value/Range DescriptionFactory Setting(P1.3)24 LOG function fulfilledMessage if the logical operation of P13.3 is fulfilled (LOG = 1)25 PID controller, actual value monitoringMessage if the actual value is within the hysteresis set at P9.15and P9.1626 External brake actuatedSwitch threshold: set value of P12.827 Current monitoringSwitch threshold: set value of P5.828 Fieldbus, Remote outputThe number of the assigned digital output is written directly tothe control word (ID2001, bit 13)P13.2 1454 X — LOG function, Selection input B 0Like P13.1 —P13.3 1455 X — LOG function, select operation 0Logical operation (LOG) of the selected functions ofparameter P13.1 (A) and P13.2 (B)0 A AND B1 A OR B2 A XOR B, exclusive A or BSignal Logic Link (LOG) XOR(Exclusive or)A B AND OR0 0 0 0 00 1 0 1 11 0 0 1 11 1 1 1 0The result of the logic operation (LOG) can be assigned to oneof the three digital outputs (DO = P5.3), RO1 = P5.1 andRO2 = P5.2 with the value 24, or called via the serial interface(RS485, Modbus RTU) or an optional fieldbus connection(CANopen, PROFIBUS DP)
