Parameters74 M-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.comDigital Inputs, continuedPNU IDAccessRUN Value/Range DescriptionFactory Setting(P1.3)P3.12 1020 — PID controller deactivate 6Like P3.2 Allocation of the function to control signal terminalsWhen switching on +24V power, the PID controller isblocked via the assigned control signal terminal (DI1 to DI6)P3.13 1400 — — (Not used) —P3.14 1401 — External brake, feedback signal (N/O) 0Like P3.2 Assignment of control signal terminalP3.15 1402 — Change acceleration/deceleration time (acc 2/dec 2) 0Like P3.2 Assignment of control signal terminalSwitch acceleration time from acc1 (P6.5) to acc2 (P6.19)Switch deceleration time from dec1 (P6.6) to dec2 (P6.20)P3.16 1403 — Stop acceleration/deceleration time 0Like P3.2 Assignment of control signal terminalStops all acceleration (P6.5, P6.19, P14.9) and decelerationtimes (P6.6, P6.20, P14.10)P3.17 1404 — Block parameter access 0Like P3.2 Assignment of control signal terminalBlocks access to all parametersNote: The resetting of all parameters to the default settingsvia the STOP button (held down 5s) remains activeP3.18 1405 — Motor potentiometer, increase valueAcceleration time, see “P6.5” (acc1)0Like P3.2 Assignment of control signal terminalP3.19 1406 — Motor potentiometer, decrease valueDeceleration time, see “P6.6” (dec1)0Like P3.2 Assignment of control signal terminalP3.20 1407 — Motor potentiometer, set value to zero 0Like P3.2 Assignment of control signal terminalP3.21 1408 — PLC program start 0Like P3.2 Assignment of control signal terminal
