Parameters126 M-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.comSystem Parameter, continuedPNU IDAccessRUN Value/Range DescriptionFactory Setting(P1.3)S2.6 813 — Parity type 00 None1 Even2 OddS2.7 814 — Communication timeout 00 = Not used1 = 1s2 = 2s…255 = up to 255sS2.8 815 — Reset communication status0 = Not used1 = Resets parameter S2.1Unit CounterS3.1 827 X — MWh counter 0.00S3.2 828 X — Operating days (d) 0S3.3 829 X — Operating hours (h) 0S3.4 840 X 0–0000 RUN counter, days —S3.5 841 X 0–24 RUN counter, hours —S3.6 842 X 0– 0000 Fault/alarm counter —User SetS4.1 830 0–15 Display contrast 15S4.2 831 X — Restore factory defaults 00 = Factory setting or changed value (user setting for parameter)1 = Restores factory settings for all parametersS4.3 832 — Password 0000The password protection applies to all parametersPassword forgotten (see “Service and Warranty” on Page 17)Setting a password requires user to select a value and confirmvalue a second time. Password protection can be disabled byinputting the password value into parameter S4.3 after it hasbeen set. All other parameter changes will require the passwordbefore the user can modify.0000 Deactivated0001–9999 Activated, set individual password
