ParametersM-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.com 63Setting Parameters, continuedAll settings are stored automatically by actuating the OK button.Parameters marked in the “Access Right RUN” column with , can be changed duringoperation (RUN mode).Sequence Commands Display Description3 If the parameter value is flashing, you can use the two arrow keys tochange the value within the permitted rangeP1.1 = You exit the Quickstart Wizard (access to all parameters)The selected value is confirmed with the OK buttonThe display now changes automatically between the new value andthe respective parameter number4 The other parameters in the main menu PAR can be selected with thetwo arrow buttons ( or ) (closed circuit, Example: Factory setting)The arrow buttons (< and >) enable you to select the first parameter ofeach parameter group> P1.1, P2.1, P3.1, P4.1, …< S4.1, S3.1, S2.1, S1.1, P14.1, …5 By actuating the BACK/RESET button, you exit main menu PAR (arrowflashes, see sequence 1)RUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLTOKRUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLTRUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLT P14.16P2.1P1.1S4.3S1.1RUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLTRUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLTBACKRESETRUN STOP ALARM FAULTREADYREFFWD REV I/O KEYPAD BUSMONPARFLT
