Parameters66 M-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.comQuick Start Parameter GuideThe following table shows the preset application parameters of parameter P1.2. in the factory setting.With P1.1 = 1 you are guided through the drive parameters in steps (Quickstart Wizard) after the powersupply is switched on and after the factory settings are activated.Note: To cancel Quickstart Wizard, or to set parameter not contained in the Quickstart Wizard, set parameter P1.1 = 0.For detailed explanation of parameters and their options, see the detailed parameters list starting on Page 67.Predefined Application Parameters from Parameter P1.2Notes 230V = MMX11_, MMX12_, MMX32_.400V = MMX34_, 575V = MMX35_.This parameter will default based on style of unit.Parameter(PNU)Basic(Standard Drive) Pump Drive Fan Drive High Load DesignationP1.1 1 = Only quickconfigurationparameters1 = Only quickconfigurationparameters1 = Only quickconfigurationparameters1 = Only quickconfigurationparametersQuick start parametersP1.2 0 = Basic 1 = Pump drive 2 = Fan drive 3 = Hoisting device(high load)ApplicationP1.3 1 = N/A 1 = N/A 1 = N/A 1 = N/A Country specific defaultsettingsP6.1 1 = Control signalterminals (I/O)(I/O)1 = Control signalterminals (I/O)(I/O)1 = Control signalterminals (I/O)(I/O)1 = Control signalterminals (I/O)(I/O)Primary remote controlsourceP6.2 3 = AI1 (analogsetpoint 1)3 = AI1 (analogsetpoint 1)3 = AI1 (analogsetpoint 1)3 = AI1 (analogsetpoint 1)Primary remote speedreferenceP6.3 00.00 Hz 20.00 Hz 20.00 Hz 00.00 Hz Minimum frequencyP6.4 60.00 Hz 60.00 Hz 60.00 Hz 60.00 Hz Maximum frequencyP6.5 3.0s 5.0s 20.0s 1.0s Acceleration time (acc1)P6.6 3.0s 5.0s 20.0s 1.0s Deceleration time (dec1)P6.7 0 = Ramp(acceleration)0 = Ramp(acceleration)0 = Ramp(acceleration)0 = Ramp(acceleration)Start functionP6.8 0 = Free coasting 1 = Decelerationtime (ramp)0 = Free coasting 0 = Free coasting Stop functionP7.1 Ie I e I e I e Motor, rated currentP7.3 1720 RPM 1720 RPM 1720 RPM 1720 RPM Motor, rated speed (RPM)P7.4 0.85 0.85 0.85 0.85 Motor, power factor(cos )P7.5 230/460/575V 230/460/575V 230/460/575V 230/460/575V Motor, rated operatingvoltageP7.6 60 Hz 60 Hz 60 Hz 60 Hz Motor, rated frequencyP11.7 0 = Deactivated 0 = Deactivated 0 = Deactivated 1 = Enabled Torque increaseM1.1 0.00 Hz 0.00 Hz 0.00 Hz 0.00 Hz Output frequency(display only)
