Appendix AM-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.com 165Digital InputPNU IDAccessDesignation Value Range PageFS(P1.3)UserSettingRUN ro/rwP3.1 300 rw Start/Stop-Logic 0 = DI1 (FWD), DI2 (REV), REAF1 = DI1 (FWD) + DI2 = REV2 = DI1 (Start pulse), DI2 (stop pulse)3 = DI1 (FWD), DI2 (REV)72 3P3.2 403 rw Start signal/Start FWD (1) 0 = Deactivated1 = Activated via control signalterminal 8 (DI1)2 = Activated via control signalterminal 9 (DI2)3 = Activated via control signalterminal 10 (DI3)4 = Activated via control signalterminal 14 (DI4)5 = Activated via control signalterminal 15 (DI5)6 = Activated via control signalterminal 16 (DI6)72 1P3.3 404 rw STOP signal/Start REV (1) Like P3.2 72 2P3.4 412 rw Reverse Like P3.2 72 0P3.5 405 X rw Ext. fault close (N/O) Like P3.2 72 0P3.6 406 X rw Ext. fault open (N/C) Like P3.2 73 0P3.7 414 rw Fault reset Like P3.2 73 5P3.8 407 rw Run enable Like P3.2 73 0P3.9 419 rw Fixed frequency,binary value B0Like P3.2 73 3P3.10 420 rw Fixed frequency,binary value B1Like P3.2 73 4P3.11 421 rw Fixed frequency,binary value B2Like P3.2 73 0P3.12 1020 rw PID controllerdeactivateLike P3.2 74 6P3.13 1400 — — (Not used) — — —P3.14 1401 rw External brake,feedback signal (N/O)Like P3.2 74 0P3.15 1402 rw Change acceleration/deceleration time (acc 2/dec 2)Like P3.2 74 0P3.16 1403 rw Stop acceleration/decelerationtimeLike P3.2 74 0P3.17 1404 rw Block parameter access Like P3.2 74 0P3.18 1405 rw Motor potentiometer, increasevalueLike P3.2 74 0P3.19 1406 rw Motor potentiometer,decrease valueLike P3.2 74 0
