Appendix AM-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.com 169Drives Control, continuedPNU IDAccessDesignation Value Range PageFS(P1.3)UserSettingRUN ro/rwP6.13 731 X rw REAF, automatic restart after anerror message0 = Deactivated1 = Activated85 0P6.14 1600 X rw Stop on direction change via thearrow buttons () of the keypad(KEYPAD)0 = Deactivated1 = Activated85 1P6.15 184 X rw Keypad frequency reference (REF) –P6.4 – +P6.4 Hz 86 0.00P6.16 1474 X rw Stop button active 0 = Deactivated (no)1 = Activated (yes)86 1P6.17 1427 X rw Secondary remote control source 1 = Control signal terminals (I/0)2 = Control unit (KEYPAD)3 = Fieldbus (BUS)86 3P6.18 1428 X rw Secondary remote speed reference 0 = Fixed frequency (FF0)1 = Operating unit (REF)2 = Fieldbus (BUS)3 = AI14 = AI25 = Motor potentiometer86 2P6.19 502 X rw Secondary acceleration time(acc2)0.1–3000s 86 10.0P6.20 503 X rw Secondary deceleration time(dec2)0.1–3000s 86 10.0P6.21 526 X rw Acceleration transition frequency(acc1–acc2)0.00–P6.4 Hz 86 0.00P6.22 1334 X rw Deceleration transition frequency(dec1–dec2)0.00–P6.4 Hz 86 0.00P6.23 1429 X rw REV blocked 0 = Deactivated1 = Activated86 0P6.24 509 X rw Skip frequency 1, lower value 0.00–P6.25 87 0.00P6.25 510 X rw Skip frequency 1, upper value P6.24–P6.4 Hz 87 0.00P6.26 511 X rw Skip frequency 2, lower value 0.00–P6.27 87 0.00P6.27 731 X rw Skip frequency 2, upper value P6.26–P6.4 Hz 87 0.00P6.28 513 X rw Skip frequency 3, lower value 0.00–P6.29 87 0.00P6.29 514 X rw Skip frequency 3, upper value P6.28–P6.4 Hz 87 0.00P6.30 759 X rw Automatic REAF attempts 1–10 87 3P6.31 1481 X rw Manual mode, primary controlsource1 = Control signal terminals (I/0)2 = Control unit (KEYPAD)3 = Fieldbus (BUS)87 1P6.32 1482 X rw Manual mode, primary speedreference0 = Fixed frequency (FF0)1 = Operating unit (REF)2 = Fieldbus (BUS)3 = AI14 = AI25 = Motor potentiometer87 3P6.33 1483 X rw Manual mode, KEYPAD lock 0 = Deactivated1 = Activated87 1
